💙Welcome to Pooxtra power inverter store, all orders are free shipping within USA 48 states 💙

Which Waveform Caters to Your Demand : True Sine Wave or Modified Sine Wave ?

Which Waveform Caters to Your Demand : True Sine Wave or Modified Sine Wave ?


One of the most common tech questions debated today is which kind of waveform inverter is better for choice between true sine wave (TSW), (sometimes referred to as Pure Sine Wave) and modified sine wave (MSW) technology.

Let’s begin by addressing what alternating current (AC) means. AC literally means that the current alternates its direction over and over again (every 8 milliseconds for the US power grid). As is demonstrated in the Fig.1, a TSW or PSW, like shore power, alternates smoothly with a sinusoidal curve that has a rounded peak and a clean ‘zero cross’ to a rounded valley. MSW (in the Fig.2) produces instantaneous peak voltage for a few milliseconds, down to zero for a few milliseconds, then back to the valley. Now that we’ve covered the foundation of how AC operates, let’s address the bigger issue.


QUESTION 1: Can you provide examples of applications for MSW and PSW power?

MSW (modified sine wave) power is usually sufficient to run many electronic devices with some distinct exceptions. One example is a typical digital clock. Some clocks tell time by using a charged crystal that has a consistent pulse which a microprocessor uses to calculate time with a simple algorithm. These clocks are not affected by MSW power. Other digital clocks use the incoming AC current to calculate time. The processor ‘counts’ how many times the voltage reaches zero, or ‘zero crosses.’ TSW (true sine wave) waveforms cross zero cleanly, while MSW waveforms ‘rest’ on zero for a few milliseconds. The processor could interpret this rest as multiple zero crosses resulting in the time being calculated incorrectly. Many electronic devices utilize digital time calculations as a function of their operation. Other issues that can occur with MSW inverters are many models of electric blankets, coffee makers, laser printers and other devices that regulate heat using a microprocessor that may not operate correctly.

QUESTION 2: What are the advantages of using modified sine wave products?

Modified sine wave products are initially more economical than pure sine wave products. In addition, MSW inverters have the advantage when the load is a simple induction load like a motor, or a resistive load like a light bulb. MSW inverters easily fill this role and typically use DC more efficiently than their PSW counterparts. However, with today’s technological advancements and the rapid proliferation of sensitive electronics that require true sine wave power to operate correctly, operators often now prefer the PSW inverter in lieu of the more limited MSW inverter, particularly when it can now be purchased for roughly the same price.

QUESTION 3: How do I determine which power source is right for me?

To answer that question, you really must consider how you want to use your inverter. The more complex or state-of-the-art your demand is, the more likely you will want and need to consider a PSW inverter. If, on the other hand, your demand is simple power and you have no aspirations of utilizing today’s sensitive electronic devices either now or in the future, a MSW inverter is the more economical choice.



Next Post